Candix Machinery, Inc.
Tube and Pipe forming machinery since 1985
Stainless steel collaring Duct collaring Home



MODEL TCM-50
Header tube manifold machine center for copper tube





MACHINE FEATURES AND SPECIFICATIONS:

Extruder system: Forming of collars by pushing out from inside. Fast and suitable for large scale production.
Pilot hole punch: Optional oval pilot-hole press for maximum collar height.
Material: Copper tube 0 temper to 1/2 hard, copper tubing, aluminum tubes, and more. Please consult about other materials
Min Tube OD 15.88 mm
Max Tube OD: 50 mm (2"). Large diameters up to 100mm (4") possible upon request.
Max Wall: 3 mm Wall Thickness (0.118")
Collaring ID: 9.56mm ID to 50mm ID. 1:1 collaring possible.
Max Length: 1500 mm (60") tube length. Up to 5000 mm upon request.
Cycle Time: From 3 seconds per collar.
Example: 15.88mm OD x t1.2mm x 9.56mID 1/2H
VIDEO: VIDEO introduction of TCM-50 collaring machine . Right click and save to disk. 3.2 Mb.


Please contact us for further information.

Candix Machinery, Inc.
ERGO 401, 1-18 Koubai-cho, Kita-ku, Osaka 530-0038 Japan
Fax: +81-6-6147-7783 | Email: sales@candix-machinery.com | www.candix-machinery.com
©Candix Machinery, Inc. 2008. All rights reserved.