TCM-SS100 Stainless Steel Ball Collaring Machine
BACK TO MAIN COLLARING PAGE | Home


BALL PULL-OUT SYSTEM
The following is a brief description of the ball pull-out cycle. Cycle can be fully automatic, or done one step at a time. For better understanding of how the machine works, please download and watch video footage of a ball-pullout cycle.
316L stainless steel collaring samples 316L stainless stell collar.
Ball Pull-Out Video Demonstration
Rightclick and save 3.9Mb.
NOTE: TCM-SS100 ball pull-out system required an oval pilot hole. Ball Pull-Out system does NOT provide a pilot hole. The optional Extruder System can provide the necessary pilot hole. Otherwise pilot hole will have be made by hand, milling machine, drill, stamp, press, or other method.
Tube with pilot-hole is slid over mandrel with ball-holder and ball. Tube is then clamped in feed-clamp and positioned so that center of pilot hole is right above center of pull-out ball. (Optional NC feeding for easy positioning).


Hydraulic clamp dies firmly clamps work. Head moves down and connecting screw is inserted into pull-out ball.Connecting screw automatically spins, connecting with ball.


Hydraulic cylinder pulls out ball thereby forming collar.


Sizing punch is lowered down into the collar to ensure perfect roundness and exact diameter.


Punch is automatically retracted and returned. Ball is lowered back into ball holder and connecting screw spins to disconnect from ball.


Connecting screw is retracted. Clamps are released and tube is either moved to next collaring position (NC positioning optional) or removed from machine.
Ball Pull-Out Video Demonstration
Rightclick and save 3.9Mb.
Bull being pulled out Surface treated balls Opposite collars

BACK TO MAIN COLLARING PAGE
Contact us for more details:


Candix Machinery, Inc.
ERGO 401, 1-18 Koubai-cho, Kita-ku, Osaka 530-0038 Japan
Fax: +81-6-6147-7783 / Email: sales@candix-machinery.com / www.candix-machinery.com
cCandix Machinery, Inc. 2008. All rights reserved